MKC TOOLS


3/4 HP DC Motor/Controller unit for 10ER Shopsmith


This is an example of what you can have for your 10ER. Nice Pacific Scientific high end 3/4HP treadmill motor with a KB motor controller mounted for use on the 10ER Shopsmith or just about any drill press. Both are lightly used and in excellent condition. The motor is a 3/4 HP 1750 rpm enclosed treadmill duty with a standard 5/8" shaft so your standard 10ER motor pulley will fit. The rpm range varies depending on the motor and you still have your three step pulleys to customize the speed range to suit your needs. It is completely assembled, wired with a 10' 14 ga. power cord and comes with new mounting hardware ready to mount on your 10E/ER machine or drill press. Call or email for availability.

Extras available:
new belt 11.50
new balanced pulley 39.50
reverse switch installed 39.50
Digital tach installed 95.00

Looks similar to this one when mounted


Contact by Email skip@mkctools.com 
Or Call 817-319-2297 ---                                 
                                 MKC Tools Home